CTR-2500 Cross Section machine

Product Specification

Machine configuration

1.Digital card position zoom high-definition microscope
2.German Basler 5 million pixel CCD
3.Integrated pure white LED light source control
4.Automatic measurement software
5.All-in-one computer
6.Cleaning solution 100ML
7.Standard ruler 0.1/10mm

Cutting diameter range

0.01-16mm

Scope of application

AWG46#—AWG3/0，0-90mm2

Machine control method

PLC Automatic Control

Machine display mode

7 ” touch panel

X-axis moving speed

0-10mm/s

Z axis lifting speed

0-10mm/s

Cooling Method

Air Cooled

Testing Software

X-Scan automatic scanning software with AI function

microscope magnification

0.7X-4.5X

Cutting disc Spec（mm）

125mm

Grinding Disc Spec（mm）

125mm

Machine Size WHD(mm)

575X410X350

Weight (Kg）

30

Product Description

Equipment Usage:

This cross sectional analyzer is an integrated automatic cutting and grinding analysis instrument, with PLC programming, automatic cutting and grinding. The applicable range of wire diameter is AWG46—AWG000 (0—90mm2). The system is suitable for the analysis and test requirements of the cross sectional in the fields of automobile industry, home appliance industry, electronics industry and new energy.

Characteristic

1．No resin curing required
In the past,the resin was solidified and hardened to be cut; then rough grinding and polishing were time-consuming and labor-intensive, and it took hours to make asample. Now this product does not require resin solidification. With automatic cutting and grinding, and the test can be completed within 5 minutes for a sample.

2．Automatic Cutting And Grinding
Automatic cutting and grinding are integrated, and the four-axis automatically completes all pre-actions

 

3. Cutting and grinding machine table with 7-inch touch screen section in Chinese and English,no pressure to operate

It can be cut separately, ground and polished separately, or can be cut and polished fully automatically. Comes with “Learning Mode”, you can operate by viewing pictures(exclusive in the industry); you can even customize and set parameters for personalized cutting, grinding and polishing, as long as it can be clamped, it is not a problem

4．Terminal-specific jigs are available for terminals of various sizes Exquisite stainless steel fixture, fine teeth clamping, a good assistant for precision cutting, corrosion resistance

5. Chinese and English professional terminal analysis software (exported to Asian and American markets), supports Windows operating system; can analyze compression ratio C/R, C/H, C/W porosity and more than 10 standard test data, fully meet VW60330, Renault 36- 05-019/–G, PSA 9634115099, Uscar, QC T 417.1-2001 and other standards

6. With the automatic AI function of the software, the test product does not need to be placed upright, as long as it is in the center of the image, it will be automatically rotated for testing; for automatic testing, the terminal cross-section test report (Excel format) can be exported with one key, which can be saved or printed

Shipping List